Komatsu D65PX-17

D65PX-17
Click on a thumbnail to enlarge
D65PX-17 D65PX-17 D65PX-17 D65PX-17
Machine Key Details
Make: Komatsu
Model: D65PX-17
Stock No: 70248
Year: 2013
Hours: 3233
Location: Southampton
SUBSCRIBE TO BE NOTIFIED WHEN NEW STOCK BECOMES AVAILABLE

Inspection Report

Inspected by an independent plant service and repair company.

General Condition

 
Overall condition: Machine in good condition, paint work on track frame poor.

Engine

 
General engine running condition Very good, picks up drives and steers well.
4
Oil or fuel leaks None.
4
Any blow by? None
4
Engine model and serial number SAAD114E-5 SN 26900860
D65PX-17
Click on a thumbnail to enlarge
D65PX-17

Transmission

 
Gear change Good
4
Steering Good
4
Oil leaks None
4
General transmission running condition Very good, picks up and starts well.
4

U/C

 
Sprockets 90% good.
4.5
Bottom rollers 80% good
4
Top rollers 198mm - 80% good.
4
Pins and bushings. 73mm - 90% good. Not turned
4.5
Rail height 130mm - 90% good.
4.5
Shoe height 67mm - 90% good.
4.5
Shoe width 760mm
D65PX-17
Click on a thumbnail to enlarge
D65PX-17 D65PX-17 D65PX-17 D65PX-17 D65PX-17 D65PX-17 D65PX-17 D65PX-17 D65PX-17

Cab

 
Back up alarm Working
4
Battery isolator switch Working
4
Lights All working
4
Wipers All working
4
Heater Working.
4
AC Working
4
Seat condition Small marks in the cushion.
4
Cladding condition Good.
4
Floor mat condition Good
4
Seat belt Good.
4
Horn Working
4
Cab glass All good.
4
Steps and grab handles All good.
4
D65PX-17
Click on a thumbnail to enlarge
D65PX-17

Blade

 
Blade type PAT - 6 way.
Blade dimensions 4000mm x 1240mm
Cutting eges condition Fair, not turned.
3.5
Blade to arm pins, wear and shims. Slight wear.
4
Trunions, wear and shims. Pivot ball, bush slight.
4
General blade condition Very good.
4
D65PX-17
Click on a thumbnail to enlarge
D65PX-17 D65PX-17

Panels & Paint/Decals

 
Any damage to panels None.
4
Paint condition Good overall, worn on track frame.
Decals Good.
3

Dimensions

 
  Length Width Height
Dimensions for shipping (blade straight) 5800mm 4000mm 3300mm
Dimensions for haulage. (blade turned) 6700mm 3750mm 3300mm
Measurement outside to outside of tracks. 2985mm