Komatsu D41P-6

Komatsu D41P-6
Click on a thumbnail to enlarge
Komatsu D41P-6 Komatsu D41P-6
Machine Key Details
Make: Komatsu
Model: D41P-6
Stock No: 70868
Year: 2006
Hours: 4362
Location: Southampton.
Inspection report compiled by an independent service company based in Southampton.
SUBSCRIBE TO BE NOTIFIED WHEN NEW STOCK BECOMES AVAILABLE

Inspection Report

Inspected by an independent plant service and repair company.

General Condition

 
Overall condition: Machine in fair condition.
Overall rating 3.5

Engine

 
Any blow by? None
4
Oil or fuel leaks None
4
General engine running condition Starts and runs well.
4
Komatsu D41P-6
Click on a thumbnail to enlarge
Komatsu D41P-6

Transmission

 
Gear change Good
4
Steering Good
4
Oil leaks None
4
General running condtion Good
4

U/C

 
Shoe width 700mm
Shoe height 45mm - 70% good.
3.5
Raile height 100mm - 70% good
3.5
Pins and bushings NOT TURNED - 60% good
3
Idler height 20mm - 70% good
3.5
Top rollers 70% good
3.5
Bottom rollers 70% good
3.5
Sprockets 60% good.
3
Komatsu D41P-6
Click on a thumbnail to enlarge
Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6

Cab

 
Lights All working
5
Wipers Rear working - front and sides to be repaired.
1
Heater Working
4
AC Working
4
Seat condition Fair, small holes in the cushion
3
Cladding condition Fair to good.
3.5
Floor mat condition Good
4
Seat belt Good
4
Cab glass sound Good.
4.5
Steps and grab handles Grab handles missing, to be replaced.
2.5
Komatsu D41P-6
Click on a thumbnail to enlarge
Komatsu D41P-6 Komatsu D41P-6

Blade

 
Blade type PAT - 6 WAY
Blade dimensions 3350mm x 1080mm
Cutting edges Have been turned.
2.5
Blade to arm pins, wear and shims Some wear
3.5
Trunions wear and shims Some wear
3.5
General blade condition Good
4
Komatsu D41P-6
Click on a thumbnail to enlarge
Komatsu D41P-6 Komatsu D41P-6

Panels & Paint/Decals

 
Paint condition Sratched and faded in places, fair.
3
Decals R/H rear ripped
3

Dimensions

 
  Length Width Height
Shipping dimensions (blade straight) 6000mm 3350mm 2950mm
Haulage dimensions (blade turned) 6360mm 2505mm 2950mm
Measurement from outside to outside of tracks 2505mm