Komatsu D155A-5

D155A-5
Click on a thumbnail to enlarge
D155A-5 D155A-5 D155A-5 D155A-5 D155A-5
Machine Key Details
Make: Komatsu
Model: D155A-5
Year: 2005
Hours: 2533
Single shank ripper.
SUBSCRIBE TO BE NOTIFIED WHEN NEW STOCK BECOMES AVAILABLE

Inspection Report

Inspected by an independent plant service and repair company.

General Condition

 
Overall condition: The machine is in very good overall condition, paint is original. There is only a small amount of wear in this machine. UC has some wear, caused by working in sand soil.

Engine

 
Overall engine condition Starts and runs very well
Any leaks seen No Oil leaks
Any blow by No Blow By visible
D155A-5
Click on a thumbnail to enlarge
D155A-5

Transmission

 
Gear change Very good
Steering Very good
Oil leaks None seen

U/C

 
Shoe width 560mm
Shoe height 60mm - 60% good
Rail height 130mm - 40% good
Pins and bushings 60% good - Not turned
Idler height 30mm - 40% good
Top rollers 30% good
Bottom rollers 30% good
Sprockets 20% good
D155A-5
Click on a thumbnail to enlarge
D155A-5 D155A-5 D155A-5 D155A-5 D155A-5 D155A-5 D155A-5 D155A-5 D155A-5 D155A-5 D155A-5 D155A-5 D155A-5

Cab

 
Lights All working
Wipers All working
Heater Working
AC Not working correctly
Seat In good condition
Cladding and floor mat In good condition
Glass All good
D155A-5
Click on a thumbnail to enlarge
D155A-5 D155A-5 D155A-5 D155A-5 D155A-5

Blade

 
Cutting edges Main edge has been turned - 65 mm remaining
Any wear in pins Very little
Wear in trunions Very little
Bottom of blade Very good
General blade condition Looks like blade has worked on light material
D155A-5
Click on a thumbnail to enlarge
D155A-5 D155A-5 D155A-5 D155A-5 D155A-5 D155A-5

Attachment

 
Ripper type Single shank
Any wear in ripper Very little wear if any, looks like not used a great deal
D155A-5
Click on a thumbnail to enlarge
D155A-5 D155A-5 D155A-5 D155A-5

Panels & Paint/Decals

 
D155A-5
Click on a thumbnail to enlarge