Champion 720A Series III

Champion 720
Click on a thumbnail to enlarge
Champion 720 Champion 720 Champion 720
Machine Key Details
Make: Champion
Model: 720A
Stock No: 70188
Year: 1993
Hours: 7300
Location: Southampton
SUBSCRIBE TO BE NOTIFIED WHEN NEW STOCK BECOMES AVAILABLE

Inspection Report

Inspected by an independent plant service and repair company.

General Condition

 
Overall condition: Inspection report compiled by an independent plant service company based in Southampton.
Are there any Cracks or Wields: None

Engine

 
Engine manufacturer Cummins
Any blow by None
4
Oil or fuel leaks No fuel leaks, small leak from oil cooler and engine block
3
General running condition Starts and runs well, stack pipe broken from silence box and missing.
3
Champion 720A III
Click on a thumbnail to enlarge
Champion 720A III

Drive Train

 
Transmission Good no leaks
4
Torque convertor Good no leaks
4
Front axle Pins and bushes good. Track rod ends have been welded.
3
Differential rear Good, oil level ok.
4
Final drives Good, no leaks.
4
General condition Drives well, transmission sound good. Handbrake not working - to be repaired, footbrake good.
3

Hydraulics

 
Pumps Good, no leaks.
4
Hydraulic motors Good, no leaks.
Valves No leaks
4
Hydraulic tank No leaks or damage.
4
Hoses Good
4
Cylinders No leaks
4
Auxiliary Hyds Good
4
General running condition of hydraulics. Very good, no leaks anywhere.
4
Champion 720A III
Click on a thumbnail to enlarge
Champion 720A III Champion 720A III

Cab

 
Battery isolator switch Working
4
Lights All working
4
Wipers All working
4
Heater All working
4
AC Not fitted. Two cooler fans, one not working.
2.5
Seat condition Cushion ripped, to be covered.
3
Floor mat condition Very dirty - to be cleaned.
2.5
Cladding condition Very dirty - to be cleaned.
Seat belt Catch not working.
Horn Not working
Cab glass Good
Steos and grab handles N/S cab step broken off, others good.
3
Champion 720A III
Click on a thumbnail to enlarge

Blade

 
Blade dimensions 4250mm x 504mm
Cutting edges condition Good, n/s corner broken off.
3
Linkage on back of blade Good
4
Turntable & drive sprocket. Needs tightening.
3
General blade condition Edges good, one corner broken, no damage or leaks. Linkage good.
3
Champion 720A III
Click on a thumbnail to enlarge
Champion 720A III Champion 720A III

Ripper

 
Scarifer manufacturer Champion
Number of tines Six, four tips missing.
2
Wear in tine pins Good
3
Wear in mounting pins Good
3
General condition of scarifier. Good

Panels & Paint/Decals

 
Any damage to panels None
4
Paint condition Good
3
Any decals ripped. No
4

Tyres

 
L/H front 20% good. No cuts or damage.
R/H front 20% good. No cuts or damage.
L/H rear front 20% good, No cuts or damage.
R/H rear front 20% good, no cuts or damage.
R/H rear back 20% good, no cuts or damage.