Caterpillar D6N LGP (70103)

Caterpillar D6N LGP
Click on a thumbnail to enlarge
Caterpillar D6N LGP D6N LGP D6N LGP D6N LGP D6N LGP
Machine Key Details
Make: Caterpillar
Model: D6N LGP
Stock No: 70103
Year: 2005
Hours: 6555
SUBSCRIBE TO BE NOTIFIED WHEN NEW STOCK BECOMES AVAILABLE

Inspection Report

Inspected by an independent plant service and repair company.

General Condition

 
Overall condition: Inspection report compiled by an independent service company based in Southampton.

Engine

 
Any blow by None
4
Oil or fuel leaks None
4
General running condition Very good, starts and runs well.
4

Transmission

 
Gear change Good
4
Steering Good
4
Oil leaks Leak from belly plate * to be investigated
3
General running condition Very good
4

U/C

 
Shoe width 860mm
Shoe height 45mm - 50% - trailing edge of pads worn
2.5
Pins and bushings Rotating - system 1,
2.5
Idler height 65% good
3
Top rollers RH - 40% LH - 75% good
2.5
Bottom rollers 50%
2.5
Sprockets 80% good
4
Rail height 115mm - 50%
2.5
D6N LGP
Click on a thumbnail to enlarge
D6N LGP D6N LGP D6N LGP D6N LGP D6N LGP

Cab

 
Lights All working
4
Wipers Rear to be fixed, others good.
3
Heater Working
4
AC Working
4
Seat condition Good
4
Cladding condition Good
4
Floor mat condition Good
4
Seat belt Good
4
Steps and grab handles Fuel tank bottom hand rail bent, others good.
D6N LGP
Click on a thumbnail to enlarge
D6N LGP D6N LGP

Blade

 
Blade type PAT
Blade dimensions 4000mm x 1250mm
Cutting edges condition 10%
1
Blade to arm pins, wear and shims Wear to all pins and bushings
3
Trunions wear and shims A frame pins and bushings worn.
2
General blade condition Small dents in face of blade.
3.5
D6N LGP
Click on a thumbnail to enlarge
D6N LGP D6N LGP

Panels & Paint/Decals

 
Any damage to panels Rear fuel filter guard bent, lock broken, side covers bent and locks broken. RH compartment door damage * all to be looked at.
2.5
Paint condition Fair to good.
3
Any decals ripped No
3.5
D6N LGP
Click on a thumbnail to enlarge
D6N LGP

Dimensions

 
  Length Width Height
Shipping length (blade straight) 5400mm 4000mm 3200mm
Haulage dimensions (blade turned) 5900mm 3930mm 3200mm
Width from outside to outside of tracks. 3030mm