Komatsu D51PX-24

Komatsu D51PX-24
Click on a thumbnail to enlarge
Machine Key Details
Make: Komatsu
Model: D51PX-24
Stock No: 70545
Year: 2017
Hours: 1837
Location: Southampton
SUBSCRIBE TO BE NOTIFIED WHEN NEW STOCK BECOMES AVAILABLE

Inspection Report

Inspected by an independent plant service and repair company.

Engine

 
Blow By Minimal to none
4
Knocking No knocking
4
Air Cleaners Good
4
Any Smoke Minimal to none
4
Oil Or Fuel Leaks None visible
4
General Running Condition Really good
4

Transmission

 
Gear Change HST Good
4
Steering Responsive
4
Oil Leaks None visible
4
Is The Transmission Noisy? No
4
Controls Good controls
4
General Running Condition Really good
4

U/C

 
Shoe Width (mm) 710mm
5
Shoe Height (mm) 50mm, 90%
4.5
Shoes - Any Wear In Trailing Edge? Minimal
4.5
Rail Height 107mm, 90%
4.5
Any Signs Of Link Failure No signs
4
Average Diameter Of Pins And Bushings 60mm, 95%
4.5
Have Pins Been Turned On Chains? No
5
Sprockets Really good, even wear. 85 - 90%
4.5
IDLERS
Left side front idler 18mm Running thickness, 85%
4
Right side front idler 18mm Running thickness, 85%
4
TOP ROLLERS
Left side 1st roller 158mm, 157mm. 90%
4.5
Left side 2nd roller 158mm, 158mm. 90%
4.5
Right side 1st roller 157mm, 157mm. 90%
4.5
Right side 2nd roller 158mm, 158mm. 90%
4.5
BOTTOM ROLLERS
Roller 1 L/H: 178mm, 90%. R/H: 177mm, 90%
Roller 2 Visual only, 90%
Roller 3 Visual only, 90%
Roller 4 L/H: 177mm, 90%. R/H: 177mm, 90%
Roller 5 L/H: 177mm, 90%. R/H: 178mm, 90%
Roller 6 Visual only, 90%
Roller 7 Visual only, 90%

Cab

 
Cab mounts - any wear? No
4
Any wiring for laser system? No
Back up alarm Loud and clear
4
Battery isolator switch Manual and electric
4
Lights All lights work
4
Wipers All work
3
Heater Good heat
4
A/C Not great
Seat condition Good condition, works as should
4
Cladding condition Good condition
4
Floor mat condition No damage, dirty. Edges need tucking in
3.5
Seat belt Seat belt working
4
Mirrors Rear view only
4
Horn Loud and clear
4
Cab mounts Good mounts
4
Cab glass condition No damage
4
Cab glass have any cracks? No cracks
4
Any perspex fitted None fitted
4
Steps and grab handles secure? All present, no damage
4

Blade

 
Blade type 6 Way
Blade width 3345mm
Blade height 1180mm
Main lift rams, wear in pins? 1mm, 1mm, 1mm, 0.5mm
4
Swivel rams, wear in pins? 0mm, 0mm, 0mm, 0mm
4.5
Tilt ram, wear? 1mm, 1mm
4
Ball joint wear 3mm, shimable
4
Tilt ram Good condition
4
C Frame 3mm, 2mm
4
Face / moldboard Good undamaged
4
Spill rack condition Good condition
4
Cutting edges condition 40mm left
2.5
Have cutting edges been turned? Yes
General blade condition Really good overall
4

Panels & Paint/Decals

 
Any damge to panels No damage apart from one dent
4.5
Paint condition Good but faded
4
Any areas repainted No
4
Any rust patches Usual areas
4
Condition of decals To be replaced
3

Dimensions

 
  Length Width Height
Measurements with blade straight 5000mm 3345mm 3000mm
Measurements with blade turned 5740mm 2900mm 3000mm
Measurement from outside to outside of tracks 2590mm

Enquire Online

Your Name * Enquire about *
Telephone *
Message
Email Address *
Your Country
* = required field