CAT D6N LGP

CAT D6N LGP
Click on a thumbnail to enlarge
Machine Key Details
Make: CATERPILLAR
Model: D6N LGP
Stock No: 70449
Year: 2014
Hours: 1718
Location: Southampton
2014 CAT D6N LGP used dozer for sale, 1718 hrs
SUBSCRIBE TO BE NOTIFIED WHEN NEW STOCK BECOMES AVAILABLE

Inspection Report

Inspected by an independent plant service and repair company.

Engine

 
Blow By Minimal
4
Oil or Fuel Leaks None visible
4
General Running Condition Overall really good
4

Transmission

 
Gear Change Steps up nicely
4
Steering Responsive
Oil Leaks None visible
General Running Condition Overall really good
4

U/C

 
Shoe Width 842mm
Shoe Height 65mm
Shoe Trailing Edge - Any wear? Minimal
Rail Height 120mm
Any Link Failure Or Repair? None visible
Pins And Bushes 64mm not turned
Idler Height 24mm
Top Rollers 172mm
Bottom rollers Visual only, looks good
Sprockets 37mm
CAT D6N LGP
Click on a thumbnail to enlarge

Cab

 
Back Up Alarm Loud and clear
4
Battery Isolater Switch Manual fitted, working
4
lights All lights work
4
Wipers All wipers work, no washers work. to be repaired
2.5
Heater Good heat
4
A/C Mildly cold
3.5
Seat Condition Good condition, works as should
4
Cladding Condition Good overall condition
4
Floor Mat Condition Edges peeling up
3
Seat Belt Working, clean
4
Mirrors Rear view only, no damage
4
Horn Loud and clear
4
Cab Glass Condition Good condition
4
Cab Glass Any Cracks? None
4
Any Perspex Fitted None
4
Steps And Grab Handles Secure? All Present and straight
4.5

Blade

 
Blade Type 6 Way
Width 5970mm
Height 1270mm
C Frame Wear L/H 2mm, R/H 1mm
L/H lift ram wear top: 2mm, Bottom: 1mm
R/H Lift ram wear Top: 2mm, Bottom: 1mm
L/H Swivel ram wear Top: 2mm, Bottom 2mm
R/H Swivel ram wear Top: 2mm, Bottom: 1mm
Ball wear 2mm
Tilt ram wear L/H 2mm, R/H 1mm
Face / Moldboard fitted
3.5
Spill rack condition Good and straight
4
Cutting edges condition not turned, 50mm left
4.5
General blade condition needs work but ok
3.5
CAT D6N LGP
Click on a thumbnail to enlarge

Panels & Paint/Decals

 
Any Damage to panels No damage
4.5
Paint condition fresh repaint, some overspray
4
Any areas repainted Yes, entire machine
Any rust patches None
Any decals ripped None, new fitted
4.5

Dimensions

 
  Length Width Height
Blade straight 5300mm 3970mm 3180mm
Blade turned 6180mm 3600mm 3180mm
Outside to outside of tracks 3000mm

Enquire Online

Your Name * Enquire about *
Telephone *
Message
Email Address *
Your Country
* = required field