CAT D6N LGP

CAT D6N LGP
Click on a thumbnail to enlarge
CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP
Machine Key Details
Make: Caterpillar
Model: D6N LGP
Stock No: 70530
Year: 2014
Hours: 3455
Location: Southampton
RIPPERS AVAILABLE
SUBSCRIBE TO BE NOTIFIED WHEN NEW STOCK BECOMES AVAILABLE

Inspection Report

Inspected by an independent plant service and repair company.

Engine

 
Blow By Minimal
4
Knocking No knocking
4
Air Cleaners Good
3
Any Smoke No smoke
4
Oil Or Fuel Leaks None visable
4.5
General Running Condition Runs good
4
CAT D6N LGP
Click on a thumbnail to enlarge

Transmission

 
Gear Change Good
4
Steering Good / Responsive
4
Oil Leaks No leaks visable
4.5
Is The Transmission Noisy? No
4
Torque Converter No knocking
4
Controls Good
4
General Running Condition Very good
4

U/C

 
Shoe Width (mm) 840mm
4.5
Shoe Height (mm) 60mm, 85%
4.5
Shoes - Any Wear In Trailing Edge Minimal
4
Rail Height 115mm, 80%
4
Average Diameter Of Pins And Bushings 61mm, 80%
4
Have Pins Been Turned On Chains? No
4
Sprockets 22mm Tips, 75mm Gaps. Good Condition 75%
4
Left Side Front Idler 25 x 55mm, Slight pin wear. 80%
4
Left Side Rear idler 22 x 55mm, 85%
4.5
Right Side Rear Idler 25 x 55mm, 85%
4.5
Right Side Front Idler 25 x 55mm, Slight pin wear. 80%
4
Left Side 1st Top Roller 168mm, 169mm. 60%
3.5
Left Side 2nd Top Roller 168mm, 168mm. 60%
3.5
Right Side 1st Top Roller 169mm, 168mm. 60%
3.5
Right Side 2nd Top Roller 168mm, 168mm. 60%
3.5
Bottom Roller 1 L/H: 181mm, R/H: 181mm
Bottom Roller 2 L/H: 185mm, R/H: 185mm
Bottom Roller 3 L/H: 182mm, R/H: 185mm
Bottom Roller 5 L/H: 183mm, R/H: 181mm
Bottom Roller 6 L/H: 183mm, R/H: 182mm
Bottom Roller 7 L/H: 184mm, R/H: 184mm
Bottom Roller 8 L/H: 180mm, R/H: 181mm
CAT D6N LGP
Click on a thumbnail to enlarge
CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP

Cab

 
Cab Mounts - Any Wear? Good mounts
4
Any Wiring For laser System? Yes but plug is hidden
4
Back up Alarm Loud and clear
4
Battery Isolator Switch Manual, No key
2.5
Lights All lights work
4
Wipers Good
4
Heater Good heat
4
A/C Nice and cold
4
Seat Condition All working
3.5
Cladding Condition Roof dirty, generally ok
4
Floor Mat Condition Clean, wear on back edge
3
Seat Belt Working as should
4
Mirrors Rear view only
4
Horn loud and clear
4
Cab Mounts No play, solid mounts
Cab Glass Condition Some scratches and scuffs
3
Cab Glass Any Cracks No cracks
4
Any Perspex Fitted None fitted
4
Steps And Grab Handles Secure? All present, none damaged
4
CAT D6N LGP
Click on a thumbnail to enlarge
CAT D6N LGP CAT D6N LGP CAT D6N LGP

Blade

 
Blade Type 6 Way
Blade Width 3960mm
Blade Height 1270mm inc spill rack, 1060mm to top of moldboard
Main Lift Rams, Wear In Pins? L/H: Top: 3mm, Bottom: 3mm. R/H: Top: 3mm, Bottom: 1mm
Swivel Ram, Wear In Pins? L/H: Top: 3mm, Bottom: 2mm. R/H: Top: 5mm, Bottom: 2mm
Tilt Ram, Wear? L/H: 3mm, R/H: 3mm
C Frame, Wear? L/H: 5 - 8mm, R/H: 10mm
Equaliser Bar, Wear? L/H: 5mm, R/H: 10mm Seal gone
Face / Moldboard good, no damage
4
Spill Rack Condition Modified to take rake but good
3.5
Cutting Edges Condition (mm) 40mm Left
2.5
Have Cutting Edges Been Turned? Yes
General Blade Condition Overall, ok
4
CAT D6N LGP
Click on a thumbnail to enlarge
CAT D6N LGP CAT D6N LGP

Panels & Paint/Decals

 
Any Damage To Panels Yes
3
Paint Condition Fair & faded, burn mark
3.5
Any Areas Repainted No
3
Any Rust Patches Usual areas
3
CAT D6N LGP
Click on a thumbnail to enlarge
CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP

Dimensions

 
  Length Width Height
Measurement With Blade Straight (mm) 5360mm 3960mm
Measurement With Blade Turned (mm) 5920mm 3630mm
Measurement From Outside To Outside Of tracks (mm) 3000mm

Enquire Online

Your Name * Enquire about *
Telephone *
Message
Email Address *
Your Country
* = required field