CAT D6N LGP

CAT D6N LGP
Click on a thumbnail to enlarge
CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP
Machine Key Details
Make: Caterpillar
Model: D6N LGP
Stock No: 70523
Year: 2014
Hours: 4901
Location: Southampton
SUBSCRIBE TO BE NOTIFIED WHEN NEW STOCK BECOMES AVAILABLE

Inspection Report

Inspected by an independent plant service and repair company.

Engine

 
Blow By Minimal
4
Knocking No knocking
4
Air Cleaners Good
4
Any Smoke Minimal smoke
4
Oil Or Fuel Leaks None visable
4
General Running Condition Sounds and runs well
4
CAT D6N LGP
Click on a thumbnail to enlarge
CAT D6N LGP

Transmission

 
Gear Change Good
4
Steering Responsive
4
Oil Leaks None visable
4
Is The Transmission Noisy? No
4
Torque Converter Good, no knocking
4
Controls Good controls
4
General Running Condition Very good
4

U/C

 
Shoe Width (mm) 840mm
4.5
Shoe Height (mm) 52mm, 80%
4
Shoes - Any Wear In Trailing Edge Very minimal if none
4.5
Rail Height 115mm, 75%
4
Average Diameter Of Pins And Bushings 61mm, 85%
4
Have Pins Been Turned On Chains? No
4
Sprockets Both in good shape. 22mm Tips, 71mm gaps. 80%
4
Left Side Front Idler 25mm Thick, 53mm wide. Has pin wear marks, 70%
3.5
Left Side Rear Idler 25mm Thick, 53mm wide. 70%
3.5
Right Side Rear Idler 25mm Thick, 55mm wide. 70%
3.5
Right Side Front Idler 25mm Thick, 53mm wide. Has pin wear marks, 70%
3.5
Left Side 1st Top Roller 170mm x 170mm, 60%
3.5
Right Side 1st Top Roller 169mm x 170mm, 60%
3.5
Bottom Roller 1 L/H: 185mm, R/H: 185mm
Bottom Roller 2 L/H: 187mm, R/H: 188mm
Bottom Roller 3 L/H: 184mm, R/H: 186mm
Bottom Roller 4 Rock guard
Bottom Roller 5 L/H: 185mm, R/H: 184mm
Bottom Roller 6 L/H: 185mm, R/H: 184mm
Bottom Roller 7 L/H: 184mm, R/H: 185mm
Bottom Roller 8 Rock guard
CAT D6N LGP
Click on a thumbnail to enlarge
CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP

Cab

 
Cab Mounts - Any Wear? Good
4
Any Wiring For Laser System? Standard wiring
4
Back up Alarm Loud and clear
4.5
Battery Isolator Switch Manual Fitted = Seized
2
Lights All work
4
Wipers All work
4
Heater Good heat
4
A/C Nice and cold
4
Seat Condition Good condition, all works
4
Cladding Condition Good condition but dirty
4
Floor Mat Condition Worn, very dirty
2
Seat Belt Works as should
4
Mirrors Rear view only, no damage
4
Horn Loud and clear
4.5
Cab Glass Condition Dirty, minimal wiper scratches
3.5
Cab Glass Any Cracks No cracks
4
Any Perspex Fitted No perspex fitted
4.5
Steps And Grab Handles Secure? All good
4
CAT D6N LGP
Click on a thumbnail to enlarge
CAT D6N LGP CAT D6N LGP CAT D6N LGP CAT D6N LGP

Blade

 
Blade Type 6 Way
Blade Width 4060mm
Blade Height 1270mm
Main Lift Rams, Wear In Pins? L/H: Top: 2mm, Bottom: 3mm. R/H: Top: 3mm, Bottom: 4mm
Swivel Rams, Wear In Pins? L/H: Top: 2-3mm, Bottom: 2-3mm. R/H: Top: 2-3mm, Bottom: 2-3mm
Tilt Ram, Wear? 4mm
Ball Joint Wear? 8 - 10mm
Equaliser Bar, Wear? L/H: 5mm, R/H: 6 - 8mm
Face / Moldboard No damage, good
4
Spill Rack Condition Straight, no damage
4
Cutting Edges Condition (mm) 45mm left
4
Have Cutting Edges Been Turned? Yes
2
General Blade Condition Good
4
CAT D6N LGP
Click on a thumbnail to enlarge
CAT D6N LGP CAT D6N LGP CAT D6N LGP

Panels & Paint/Decals

 
Any Damage To Panels No damage
4
Paint Condition Faded slightly, overall good
4
Any Areas Repainted No
4
Any Rust Patches Usual areas
3.5
Condition Of Decals Faded, sctratched, torn. To Be Replaced
2.5
CAT D6N LGP
Click on a thumbnail to enlarge
CAT D6N LGP

Dimensions

 
  Length Width Height
Measurement With Blade Straight (mm) 5330mm 4060mm 3240mm
Measurement With Blade Turned (mm) 6190mm 3600mm 3240mm
Measurement From Outside To Outside Of Tracks (mm) 3000mm

Enquire Online

Your Name * Enquire about *
Telephone *
Message
Email Address *
Your Country
* = required field