Quality Used Bulldozers & Equipment
| Make: | CATERPILLAR |
| Model: | D6N LGP |
| Stock No: | 70445 |
| Year: | 2016 |
| Hours: | 5580 |
| Location: | Cannock |
| Blow By | Good |
| Knocking | Good |
| Air Cleaners | Good |
| Any Smoke | No |
| Oil Or Fuel Leaks | No |
| General Running Condition | Good |
| Gear Change | Good |
| Steering | Good |
| Oil Leaks | No |
| Is The Transmission Noisy? | No |
| Torque Converter | Good stall figures |
| Controls | Good |
| General Running Condition | Good |
| Shoe Width | 840mm |
| Shoe Height | 55mm 55% |
| Shoes - Any Wear In Trailing Edge | No |
| Rail Height | 113mm  |
| Any Signs Of Link Failure | No |
| Average diameter Of Pins And Bushings | 59mm 60% |
| Have Pins been Turned On Chains? | No |
| Sprockets | Good |
| Left side top roller | 163mm |
| Right side top roller | 161mm |
| Bottom rollers 1 | Left: 176mm, Right: 175mm |
| Bottom rollers 2 | Left: 180mm, Right: 179mm |
| Bottom rollers 3 | Left: 179mm, Right: 178mm |
| Bottom rollers 4 | Good |
| Bottom rollers 5 | Left: 179mm, Right: 179mm |
| Bottom rollers 6 | Left: 179mm, Right: 179mm |
| Bottom rollers 7 | Left: 179mm, Right: 179mm |
| Bottom rollers 8 | Left: 172mm, Right: 177mm |
| Cab mounts- any wear? | Good |
| Any wiring for laser system? | Yes |
| Back up alarm | Yes |
| Battery isolator switch | Yes |
| Lights | All good |
| Wipers | Good |
| Heater | Good |
| Seat condition | Good |
| Cladding condition | Good |
| Floor mat condition | Good |
| Seat belt | Ok |
| Mirrors | None fitted |
| Horn | Good |
| Cab mounts | Good |
| Cab glass condition | Good |
| Cab glass any cracks | No |
| Any perspex fitted | No |
| Steps and grab handles secure? | Yes |
| Blade type | PAT |
| Blade width | 4000mm |
| Blade height | 1300mm |
| main lift rams, wear in pins? | No |
| Swivel rams, wear in pins? | No |
| Tilt ram, wear? | No |
| Ball joint wear | No |
| Trunions wear and shims | Good |
| Tilt ram | Good |
| C frame (PAT blades) | Good |
| Centre pin ( PAT blades) | Good |
| Face / moldboard | Good |
| Spill rack condition | Good |
| Cutting edges condition | 60mm |
| Have cutting edges been turned? | No |
| General blade condition | Good condition |
| Any damage to panels | No |
| Paint condition | Good condition |
| Any areas repainted | No |
| Any rust patches | No |
| Length | Width | Height | |
| Blade Straight | 4000mm | 1300mm | |
| Blade turned | 3300mm | ||
| Outside to outside of tracks | 3000mm |
