| Make: | Volvo |
| Model: | G780 |
| Stock No: | 10065 |
| Year: | 2004 |
| Hours: | 3636 |
| Overall condition: | Ripper, push block, 16 ft moldboard, laser |
| Are there any Cracks or Wields: | None |
| Other comments | Broken door handle left side. good glass, batteries good. |
| Engine model | A1100 / |
| Oil or fuel leaks | None |
| Engine condition | Engine sounds good, no smoke |
| Transmission | No leaks / good |
| Torque convertor | Good |
| Front axle | Good |
| Differential rear | Good |
| Final drives | Good |
| General condition | No leaks |
| Pumps | Good no noise |
| Hydraulic motors | Good |
| Valves | Good |
| Hyrdaulic tank | Good |
| Hoses | Good |
| Auxiliary Hyds. | Good |
| General running condition | No leaks, no pump noise |
| Lights | Good, no broken lenses |
| Beacon | Good |
| Seat belt | Good |
| Wipers | Need replacing |
| Heater | Working, knob missing on fan |
| AC | Good |
| Seat Condition | Good |
| Cladding condition | Good |
| Floor mat condition | Dirty not torn |
| Blade dimensions | 16ft 4 inches x 2ft 3 inches |
| Cutting egdes condition | 90% good |
| Linkage on back of blade | Good |
| Turntable and drive sprocket, are there shims remaining? | Good overall, needs paint. |
| General blade condition | Good, no leaks |
| Number of tines | 3 of 5 slots |
| Wear in tine pins | 30% worn |
| Wear in mounting pins | 30% worn |
| General condition | Centre tine missing tooth |
| L/H front | 60% good - small cuts![]() |
| R/H front | 60% good - small cuts![]() |
| L/H rear front | 20% good - cuts![]() |
| R/H rear front | 20% good - cuts![]() |
| L/H rear back | 20% good - cuts![]() |
| R/H rear back | 50% good - small cuts![]() |