| Make: | Komatsu |
| Model: | D61PX-15 |
| Stock No: | 10055 |
| Year: | 2007 |
| Hours: | 1949 |
| Overall condition: | Overall condition is good. |
| Overall rating | ![]() |
| Any blow by on engine? | None ![]() |
| Oil or fuel leaks around engine? | None ![]() |
| General running condition | Starts and runs well. ![]() |
| Gear change | Good ![]() |
| Steering | Good ![]() |
| Oil leaks | Good, no leaks ![]() |
| General transmission running condition | Very good ![]() |
| Shoe width | 860mm |
| Shoe height | 80% good - 50mm ![]() |
| Rail height | 50% good - 110mm |
| Pins and bushings | 50% - Not turned. ![]() |
| Idler height | 60% good - 20mm ![]() |
| Top rollers | 80% good ![]() |
| Bottom rollers | R/S - Need to be replaced. L/S - Four need to be replaced. |
| Sprockets | L/S 50% R/S 30% ![]() |
| Lights | All working ![]() |
| Heater | Working ![]() |
| A/C | Working |
| Seat condition | Good, no marks or damage. ![]() |
| Cladding condition | Good ![]() |
| Floor mat condition | Good ![]() |
| Blade type | PAT |
| Blade width and height | 3900mm x 1300mm |
| Cutting edges condition | 50% - blade edges and corner edges need to be turned. ![]() |
| Blade to arm pins, wear and shims | Good ![]() |
| Trunions wear and shims | Good ![]() |
| General blade condition | Good, no dents, rams dry. ![]() |
| Any damage to panels | None ![]() |
| Paint Condition | Good ![]() |
| Any decals ripped | None ![]() |
| Length | Width | Height | |
| Shipping dimensions | 5700 mm | 3900mm | 3100mm |
| Haulage dimensions | 6400mm | 3700mm | 3100mm |
| Width from outside to outside of tracks | 3000mm |