Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Komatsu D41P-6, 2006 year model, 3869 hours
Call
| Make: | Komatsu |
| Model: | D41P-6 |
| Stock No: | 10056 |
| Year: | 2006 |
| Hours: | 3871 |
Inspection report carried out by an independant mechanic based in Southampton.
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Machine starts and drives well, some wear in blade linkage, new sprockets and pads fitted. Bottom rollers are quite worn. |
| Other comments | Inspection report carried out by an independent service and repair company based in Southampton, UK. |
Engine
| Any blow by? | None |
| Oil or fuel leaks? | No leaks |
| General running condition | Starts and runs well. |
Transmission
| Gear change | Good |
| Steering | Good |
| Oil leaks | No leaks |
| General running condition of transmission | Drives well. |
U/C
| Shoe width | 700mm |
| Shoe height | 50mm - 90% good  |
| Rail height | 90mm - 70% good |
| Pins and bushings | 40% good, have been turned.  |
| Idler height | 20mm - 90% good |
| Top rollers | 75% |
| Bottom rollers | Single flange, 40% good. Double flange, 25% good.  |
| Sprockets | New fitted  |
Click on a thumbnail to enlarge
Cab
| Lights | All working |
| Wipers | Working, rear wiper to be fixed. |
| Heater | Working |
| A/C | Working |
| Seat Condition | Good |
| Cladding condition | Good |
| Floor mat condition | Good |
Click on a thumbnail to enlarge
Blade
| Blade width and height | 3350 x 1000mm |
| Cutting edges condition | Good, havent been turned. |
| Blade to arm pins, wear and shims | Some wear - 70% good. |
| Trunions wear and shims | Some wear to linkage - 70% good  |
| General blade condition | Good, no dents. |
Click on a thumbnail to enlarge
Panels & Paint/Decals
| Any damage to panels | None |
| Paint condition | Good. |
| Any decals ripped. | No |
