Komatsu D41P-6 (70122)

Call

Make: Komatsu
Model: D61PX-15
Stock No: 70122
Year: 2006
Hours: 2303
Inspection report compiled by an independent service and repair company based in Southampton.
Komatsu D41P-6
Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6
Click on a thumbnail to enlarge

General Condition

Overall condition: Machine in good condition, drives well. Paint work good.
Overall rating 4

Engine

Any blow by? None  4
Oil or fuel leaks None  4
General running condition Starts and runs well, some black smoke when reved but clears quickly.  4
Komatsu D41P-6
Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6
Click on a thumbnail to enlarge

Transmission

Gear change Good, 2nd ind light not working  4
Steering Good  4
Oil leaks None  4
General running condition Good, drives and steers well.  4

U/C

Shoe width 700mm  
Shoe height 50mm - 90% good  4.5
Rail height 100mm - 75% good  3.5
Pins and bushings 55mm - 75% good - Not turned.  3.5
Idler height 20mm - 75% good  3.5
Top rollers 80% good  4
Bottom rollers 75% good  3.5
Sprockets 30% good  2.5
Komatsu D41P-6
Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6
Click on a thumbnail to enlarge

Cab

Lights No rear lights fitted.  
Wipers All working  4
Heater Working  4
AC Working  4
Seat condition Good, small mark and cig burn.  3.5
Cladding condition Good  4
Floor mat condition Good  4
Seat belt Good  4
Cab glass Good  4
Steps and grab handles All good.  4
Komatsu D41P-6
Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6
Click on a thumbnail to enlarge

Blade

Blade type 6 way - PAT  
Blade dimensions 3350mm x 1080mm  
Cutting edges condition Have been turned, good  2.5
Blade to arm pins, wear and shims Good  4
Trunions wear and shims Good  4
General blade conditon Good, no marks or dents.  4
Komatsu D41P-6
Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6 Komatsu D41P-6
Click on a thumbnail to enlarge

Panels & Paint/Decals

Any damage to panels None  4
Paint condition Good, some rust patches on lower  4
Any decals ripped None  4

Dimensions

  Length Width Height
Shipping dimensions (blade NOT turned) 4800mm 3350mm 2840mm
Haulage dimensions (blade turned) 6300mm 2515mm 2840mm
Width, outside to outside of tracks. 2500mm