Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Komatsu D41P-6, (70109)
Call
| Make: | Komatsu |
| Model: | D41P-6 |
| Stock No: | 70109 |
| Year: | 2006 |
| Hours: | 4256 |
Inspection report compiled by an independent service company based in Southampton.
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Overall machine is in fair condition for age. |
| Overall rating |  |
| Other comments | Blade angle ram leaking. |
Engine
| Engine model and serial number | Komatsu SA6D102E-2 SN 30797930 |
| Blow by | Minimal  |
| Oil or fuel leaks | None seen |
| General running condition of engine | Good |
Click on a thumbnail to enlarge
Transmission
| Gear change | Good |
| Steering | Good |
| Oil leaks | None seen |
| General running condition | Good |
U/C
| Shoe width | 700mm |
| Shoe height | 35mm - 60% good |
| Rail height | 100mm - 80% good |
| Pins and bushings | 80% good (not turned) |
| Idler height | 18mm - 80% good |
| Top rollers | 145mm - 80% good |
| Bottom rollers | 80% good |
| Sprockets | 75mm - 60% good |
Click on a thumbnail to enlarge
Cab
| Lights | Rear lights to be repaired |
| Wipers | Blades to be replaced |
| Heater | Not working - burnt out on fuse |
| AC | Not working |
| Seat condition | Seat runners worn out |
| Cladding condition | Good |
| Floor mat condition | Good |
| Seat belt | Good |
| Cab glass | OS door is perspex |
| Steps and grab handles | Good |
Click on a thumbnail to enlarge
Blade
| Blade type | PAT - 6 way |
| Blade dimensions | 3050mm x 1060mm |
| Cutting edges condition | Need turning |
| Blade to arm pins, wear and shims | Excessive wear  |
| Trunions wear and shims | Excessive wear |
| General blade condition | Bent on top - generally ok |
Click on a thumbnail to enlarge
Panels & Paint/Decals
| Any damage to panels | OS cab door and fuel tank bent |
| Paint condition | Poor |
| Any decals ripped | Faded and scratched. |
Dimensions
| Length | Width | Height | |
| Shipping dimensions (blade straight) | 5200mm | 3050mm | 2900mm |
| Haulage dimensions (blade turned) | 6500mm | 2500mm | 2900mm |
| Width from outside to outside of tracks | 2500mm |
