| Make: | Komatsu |
| Model: | D39PX-21A |
| Stock No: | 10062 |
| Year: | 2006 |
| Hours: | 2470 |
| Overall condition: | The machine is in good working order. Has brand new tracks, pins and bushings, plus new rails and sprockets. |
| Overall rating |  |
| Other comments | Service light showing. Top rollers need replacing. |
| Engine model and serial number | SAA4D102E-2 SN 26377403 |
| Blow by | Very little |
| Oil or fuel leaks | None visible |
| General running condition | Very good. |
| Gear change | Very good. |
| Steering | Very good. |
| Oil leaks | None visible |
| General running condition | Transmission operates very well. |
| Shoe width | 635mm |
| Shoe height | NEW |
| Rails | NEW |
| Pins and bushings | NEW |
| Sprockets | NEW |
| Top rollers | 17mm - 10% remaining. |
| Idler height | 20mm - 50%  |
| Bottom rollers | 40% remaining |
| Lights | All working |
| Wipers | All working, one blade split, to be replaced. |
| Heater | Works well |
| A/C | Works well |
| Seat condition | Good |
| Cladding condition | Good (some marks and stains) |
| Floor mat condition | Good. |
| Cab glass sound? | Yes |
| Steps and grab handles secure? | Yes |
| Blade type | A39PX-21EN |
| Blade width and height | 3350 mm x 930mm |
| Cutting edges | 24mm remaining, (not turned) |
| Blade to arm pins, wear and shims. | Very little play |
| Trunions wear and shims | All original shims left. |
| General blade condition. | Blade is in very good condition. |
| Any damage to panels | None |
| Paint condition | Good but slightly faded. |
| Any decals ripped. | Some small marks. |
| Length | Width | Height | |
| Shipping dimensions | 4300mm | 3350mm | 2840mm |
| Haulage dimensions | 4900mm | 3000mm | 2840mm |
| Outside to outside of tracks | 2440mm |
