Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Komatsu D39EX-21A (70132)
Call
| Make: | Komatsu |
| Model: | D39EX-21A |
| Stock No: | 70132 |
| Year: | 2006 |
| Hours: | 1921 |
Inspection report compiled by an independent service company based in Southampton.
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Overall machine in very good condition |
| Overall rating |  |
Engine
| Engine model and serial number | Komatsu SAA4D102E-2 SN 26371296 |
| Blow by | Minimal |
| Oil or fuel leaks | None seen |
| General engine running condition | Very good |
Click on a thumbnail to enlarge
Transmission
| Gear change | Good |
| Steering | Good |
| Oil leaks | None seen |
| General running condition | Very good |
U/C
| Shoe width | 460mm |
| Shoe height | 40mm - 70% good. |
| Rail height | 95mm - 75% good. |
| Pins and bushings | Not turned - 60% good  |
| Idler height | 18mm - 80% good |
| Top rollers | 145mm - 70% good |
| Bottom rollers | Rock guards fitted |
| Sprockets | 80mm - 60% good |
Click on a thumbnail to enlarge
Cab
| Back up alarm | Good |
| Battery isolator switch | Komatsu standard |
| Lights | Fronts ok, rear to be replaced. |
| Heater | Good |
| A/C | Not working, AC pump seized. |
| Seat condition | Good |
| Cladding condition | Good |
| Floor mat condition | Good |
| Seat belt | Good |
| Horn | Good |
| Cab glass sound? | Front replaced - good |
| Steps and grab handles secure? | All good |
Click on a thumbnail to enlarge
Blade
| Blade type | PAT |
| Blade dimensions | 2740mm x 1130mm |
| Cutting edges condition | 50%, have been turned.  |
| Blade to arm pins, wear and shims. | Good |
| Trunions wear and shims | Good |
| General blade condition | Mole board worn and repaired. |
Click on a thumbnail to enlarge
Panels & Paint/Decals
| Any damage to panels? | Roof and rear panel has some damage. |
| Paint condition | Good |
| Any decals ripped? | Usual scuffs |
Dimensions
| Length | Width | Height | |
| Shipping dimensions (blade straight) | 4200mm | 2740mm | 2800mm |
| Haulage dimensions (blade turned) | 4800mm | 2520mm | 2800mm |
| Outside to outside of tracks | 2120mm |
