Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Caterpillar D6N XL, 2007, 5558 hours (RR70086)
Call
| Make: | Caterpillar |
| Model: | D6N XL |
| Stock No: | 70086 |
| Year: | 2007 |
| Hours: | 5558 |
Inspection report compiled by an independent service and repair company based in Southampton.
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Overall machine is good for hours worked. |
Engine
| Engine model and serial number | Cat 3126 SN BMA36598 |
| Blow by | Minimal  |
| Oil or fuel leaks | None seen. |
| General running condition | Very good |
Click on a thumbnail to enlarge
Transmission
| Gear change | Good |
| Steering | Good |
| Oil leaks | None seen |
| General running condition | Very good |
U/C
| Shoe width | 610mm |
| Shoe width | 40mm - 75% good |
| Rail height | 115mm - 70% good |
| Pins and bushings | 70% good |
| Idler height | 25mm - 75% good |
| Top rollers | 155mm - 10% good  |
| Bottom rollers | 10% |
| Sprockets | 75mm - 75% good |
Click on a thumbnail to enlarge
Cab
| Lights | All good - working |
| Wipers | All good - working |
| Heater | Good |
| A/C | Good - working |
| Seat condition | Good |
| Cladding condition | Good |
| Seat belt | Good |
| Cab glass sound? | All glass good, no cracks. |
| Steps and grab handles secure? | Rear handles bent slightly.  |
Click on a thumbnail to enlarge
Blade
| Blade type | PAT - 6 WAY |
| Blade dimensions | 3250mm x 1200mm |
| Cutting edges condition | 75% (can be turned) |
| Blade to arm pins, wear and shims. | Good |
| General blade condition | Very good. |
Click on a thumbnail to enlarge
Panels & Paint/Decals
| Any damage to panels | Good condition / fuel tank slight dent. |
| Paint condition | Been resprayed / average |
| Any decals ripped | Usual scuffs on decals |
Dimensions
| Length | Width | Height | |
| Shipping length (blade not turned) | 5000mm | 3250mm | 3050mm |
| Measurement outside to outside of tracks | 2530mm |
