Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Caterpillar D6N XL, 2004 year model, 5800 hours
Call
| Make: | Caterpillar |
| Model: | D6N XL |
| Stock No: | 10061 |
| Year: | 2004 |
| Hours: | 5800 |
Inspection report carried out by an independent service and repair company based in Southampton.
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Machine starts and drives well. Paint work good, undercarriage good. Blade has been overhauled. |
| Overall rating |  |
Engine
| Blow by | None |
| Oil or fuel leaks | None |
| General running condition | Very good. |
Click on a thumbnail to enlarge
Transmission
| Gear change | Good |
| Steering | Good |
| Oil leaks | None |
| General transmission condition | Drives and steers well. |
U/C
| Shoe width | 600mm |
| Shoe height | 40mm - 50% good  |
| Rail height | 115mm - 90% good |
| Pins and bushings | Not turned - 90% good |
| Idler height | 80% good. |
| Top rollers | 80% good |
| Bottom rollers | 80% good |
| Sprockets | 90% good |
Click on a thumbnail to enlarge
Cab
| Lights | All working |
| Wipers | All working |
| Heater | Working |
| AC | Working |
| Seat condition | Good |
| Cladding condition | Fair to good  |
| Floor mat condition | Good |
| Seat belt | Good |
| Cab glass sound? | Good |
| Steps and grab handles secure? | All good |
Click on a thumbnail to enlarge
Blade
| Blade type | PAT |
| Blade width and heigth | 3213mm x 1200mm |
| Cutting edges condition | Good, not turned. |
| Blade to arm pins, wear and shims. | Good |
| General blade condition | Very good, no marks or dents |
Click on a thumbnail to enlarge
Panels & Paint/Decals
| Any damage to panels | No |
| Paint condition | Good |
| Any decals ripped | Rear n/s has scratch  |
Dimensions
| Length | Width | Height | |
| Shipping dimensions | 4900mm | 3213mm | 3100mm |
| Outside to outside of tracks | 2490mm |
