| Make: | Caterpillar |
| Model: | D6N LGP |
| Stock No: | 10041 |
| Year: | 2006 |
| Hours: | 5155 |
| Overall condition: | Machine looks good, but has a lot of wear to blade and tracks. |
| Blow by | None ![]() |
| Oil or fuel leaks | None ![]() |
| General running condition | Good ![]() |
| Gear change | Good ![]() |
| Steering | Good ![]() |
| Oil leaks | None ![]() |
| General running condition | Good ![]() |
| Shoe width | 50mm, height is good but edges are thin, 20% remaining ![]() |
| Rail height | 110mm 20% remaining ![]() |
| Pins and bushings | Oil filled rotation bushes - 50% ![]() |
| Idler | Some flat spots, - 50% ![]() |
| Top rollers | 95% worn ![]() |
| Bottom rollers | 95% worn ![]() |
| Sprockets | 60% good ![]() |
| Lights | All working ![]() |
| Wipers | All working ![]() |
| Heater | Good ![]() |
| A/C | Good, working ![]() |
| Seat condition | Good, working ![]() |
| Cladding condition | Good ![]() |
| Floor mat condition | Good ![]() |
| Cab glass | Good, all around |
| Step and grab handles | Good |
| Door locks | Near side door lock needs attention, hard to open from outside. |
| Blade width | 4060mm |
| Blade height | 1280mm |
| Cutting edges | Very good / New ![]() |
| Blade to arm pins, wear and shims. | Bottom pins and bushings badly worn. ![]() |
| Trunions, wear and shims | Worn ![]() |
| General blade condition | Rust on top of blade, dents in blade. ![]() |
| Any damage to panels | None ![]() |
| Paint condition | Machine paint good, blade has been hand painted. ![]() |
| Decals | Both 'D6N' decals ripped, others good. |
| Length | Width | Height | |
| Shipping dimensions | 5100mm | 4060mm | 3200mm |
| Trucking dimensions | 3106mm | 3200mm | |
| Outside to outside of tracks | 3050mm |