| Make: | Caterpillar |
| Model: | D6N LGP |
| Stock No: | 70092 |
| Year: | 2004 |
| Hours: | 6546 |
| Any blow by? | None ![]() |
| Oil or fuel leaks | None ![]() |
| General engine running condition | Starts well, no smoke. ![]() |
| Gear change | Good ![]() |
| Steering | Good ![]() |
| Oil leaks | None ![]() |
| General transmission condition | Very good, picks up and steers well. ![]() |
| Shoe width | 860mm |
| Shoe height | 40mm - 50% - one pad on each side bent. Trailing edge has wear. ![]() |
| Rail height | 110mm - 70% good ![]() |
| Pins and bushings | Not been turned - 70% good. ![]() |
| Idler height | 30mm - 75% good ![]() |
| Top rollers | 75% good ![]() |
| Bottom rollers | 75% good ![]() |
| Sprockets | 75% good ![]() |
| Wipers | All working ![]() |
| Heater | All working ![]() |
| A/C | All working ![]() |
| Seat condition | Good ![]() |
| Cladding condition | Untidy and dirty. ![]() |
| Floor mat condition | Good but dirty ![]() |
| Seat belt | Good ![]() |
| Cab glass | Good ![]() |
| Steps and grab handles | Good ![]() |
| Blade type | 6 way |
| Blade dimensions | 3970mm x 1270mm |
| Cutting edges condition | Have been turned. ![]() |
| Blade to arm pins wear and shims. | Good ![]() |
| Trunions wear and shims | Good ![]() |
| General blade condition | Very good. ![]() |
| Any damage to panels | No ![]() |
| Paint condition | Has been resprayed ![]() |
| Any decals ripped | Scratch to LHR Cat decal. ![]() |
| Length | Width | Height | |
| Shipping dimensions (blade straight) | 5200mm | 3970mm | 3200mm |
| Trucking Length | 5900mm | 3800mm | 3200mm |
| Outside to outside of tracks | 3020mm |