Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Caterpillar D6K LGP bulldozer, 2008 year model, 2964 hours
Call
| Make: | Caterpillar |
| Model: | D6K LGP |
| Stock No: | 10065 |
| Year: | 2008 |
| Hours: | 2964 |
Inspection report carried out by an independent plant service company based in Southampton
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Good, bottom and top rollers worn, chains, sprockets and rollers good. Paint work fair. Starts and drives well. Blade not marked. |
| Overall rating |  |
Engine
| Any blow by? | None |
| Oil or fuels leaks | None |
| General running condition | Starts and runs well, no smoke |
Click on a thumbnail to enlarge
Transmission
| Gear change | Good |
| Steering | Good |
| Oil leaks | None |
| General running condition | Very good |
U/C
| Shoe width | 760mm |
| Shoe height | 30mm - 20% remaining  |
| Rail height | 100mm - 75% good |
| Pins and bushings | 75% good (not turned) |
| Idler height | 75% good |
| Top rollers | 40% good  |
| Bottom rollers | 30% remaining  |
| Sprockets | 75% good  |
Click on a thumbnail to enlarge
Cab
| Lights | All working |
| Wipers | L/H door wiper not working, others ok. |
| A/C and Heater | Working |
| Seat condition | Good |
| Cladding condition | Good |
| Floor mat condition | Good |
| Seat belt | Good |
| Cab glass | Good |
| Steps and grab handles | Good. |
Click on a thumbnail to enlarge
Blade
| Blade width and height | 3301mm x 1010mm |
| Cutting edges condition | Good, not turned. |
| Blade to arm pins, wear and shims | Slight lift in center pin |
| Trunions, wear and shims | Good |
| General blade condition | Good |
Click on a thumbnail to enlarge
Panels & Paint/Decals
| Any damage to panels | No |
| Paint condition | Fair, fuel tank and front grill marked. |
| Any decals ripped | No |
Click on a thumbnail to enlarge
Dimensions
| Length | Width | Height | |
| Shipping dimensions | 5000mm | 3301mm | |
| Haulage dimensions | 5500mm | 3303 mm | |
| Width from outside to outside of tracks. | 2800mm |
