Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Caterpillar D5N LGP bulldozer, 2004 year model, 6449 hours
Call
| Make: | Caterpillar |
| Model: | D5N LGP |
| Stock No: | 10054 |
| Year: | 2004 |
| Hours: | 6449 |
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Machine is in good working order and in good condition for the hours. |
Engine
| Engine model | 3126 BMA10831 |
| Blow by | Very little  |
| Oil or fuel leaks | None visible |
| General running condition | Starts and runs well |
Click on a thumbnail to enlarge
Transmission
| Gear change | Good |
| Steering | Good |
| Oil leaks | None visible (underside dry) |
| General running condition | Good |
U/C
| Shoe width | 760mm |
| Shoe height | 32mm - 55% good  |
| Rail height | 98mm - 50%  |
| Pins and bushings | Not turned - 60% good |
| Idler height | 22mm - 55% good |
| Top rollers | 15mm - 40% good.  |
| Bottom rollers | 40% good |
| Sprockets | 40% good |
Click on a thumbnail to enlarge
Cab
| Lights | 1 x rear light to be fixed.  |
| Wipers | All working  |
| Heater | Good |
| A/C | Good |
| Seat condition | Good |
| Cladding condition | Some heater vents damaged, cup holder and ash tray damaged. |
| Cab glass sound? | Yes |
| Steps and grab handles secure? | Yes |
Click on a thumbnail to enlarge
Blade
| Blade width and height | 3330mm x 1100mm |
| Cutting edges | 15 mm remaining, already turned  |
| Blade to arm pins, wear and shims | All pins have a bit of play. |
| General blade condition | Blade is in good condition for the hours of the machine.  |
Click on a thumbnail to enlarge
Attachment
| Attachments | Dozer piped for ripper. |
Panels & Paint/Decals
| Any damage to panels | None, (stay for engine panel is damaged) |
| Paint condition | Very good. |
| Any decals ripped | Some are marked. |
Dimensions
| Length | Width | Height | |
| Dimensions for shipping | 4850mm | 3330mm | 3020mm |
| Dimensions for haulage | 5550mm | 3060mm | 3020mm |
