| Make: | Caterpillar |
| Model: | D5N LGP |
| Stock No: | 10073 |
| Year: | 2006 |
| Hours: | 4321 |
| Overall condition: | Good |
| Overall rating | ![]() |
| Any blow by? | None ![]() |
| Oil or fuel leaks? | None |
| General engine running condition | Good ![]() |
| Gear change | Good ![]() |
| Steering | Good ![]() |
| Oil leaks | None ![]() |
| General transmission running condition | Good ![]() |
| Shoe width | 760mm |
| Shoe height | 45mm - 65% good ![]() |
| Rail height | 95mm - 60% good ![]() |
| Pins and bushings | 60% good, not turned ![]() |
| Idler height | 50% ![]() |
| Top rollers | 50% ![]() |
| Bottom rollers | 50% ![]() |
| Sprockets | 75% good ![]() |
| Lights | All working ![]() |
| Wipers | All working ![]() |
| Heater | Working ![]() |
| A.C. | Working ![]() |
| Seat condition | Good, suspension weak. ![]() |
| Cladding condition | Good ![]() |
| Floor mat condition | Good ![]() |
| Seat belt | Good ![]() |
| Cab glass sound? | Good ![]() |
| Steps and grab handles secure? | Good |
| Blade type | PAT |
| Blade dimensions | 3360 x 1130mm |
| Cutting edges condition | Good, edges not been turned ![]() |
| Blade to arm pins, wear and shims | Good ![]() |
| Trunions, wear and shims | Good ![]() |
| General blade condition | Good ![]() |
| Any damage to panels? | Small dent in rear panel and NSR panel ![]() |
| Paint condition | Good ![]() |
| Any decals ripped | Good ![]() |
| Length | Width | Height | |
| Dimensions for shipping | 4750mm | 3360mm | 3100mm |
| Dimensions for haulage (blade turned) | 5500mm | 3300mm | 3100mm |
| Width from outside to outside of tracks | 2770mm |