Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Caterpillar D5N LGP - 2005 - 4303 hours (70084)
call
| Make: | Caterpillar |
| Model: | D5N LGP |
| Stock No: | 70084 |
| Year: | 2005 |
| Hours: | 4303 |
Inspection report produced by an independent service company based in Southampton.
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Overall machine in very good condition, clean and tidy for age. |
| Overall rating |  |
Engine
| Engine model and serial number | Cat 3126 SN BMA27384 |
| Blow by | Minimal |
| Oil or fuel leaks | None seen |
| General running condition | Very good |
Click on a thumbnail to enlarge
Transmission
| Gear change | Good |
| Steering | Good |
| Oil leaks | None seen |
| General transmission condition | Very good |
U/C
| Shoe width | 760mm |
| Shoe height | 40mm - 55% good  |
| Rail height | 100mm - 75% good |
| Pins and bushings | Not turned - 75% good. |
| Top rollers | 150mm - 80% good |
| Bottom rollers | 75% good |
| Sprockets | 75mm - 70% good |
Click on a thumbnail to enlarge
Cab
| Lights | All good |
| Wipers | 3 to be repaired  |
| Heater | Good |
| A/C | Good |
| Seat condition | Good |
| Cladding condition | Good |
| Floor mat condition | New - very good, |
| Seat belt | good |
Click on a thumbnail to enlarge
Blade
| Blade type | PAT - 6 way |
| Blade dimensions | 3350mm x 1100mm |
| Cutting edges | Good, can be turned. |
| Blade to arm pins, wear and shims | Normal wear in pins |
| Trunions wear and shims | ok |
| General blade condition | Good |
Click on a thumbnail to enlarge
Panels & Paint/Decals
| Any damage to panels | OS door bent |
| Paint | Good, usual scuffs |
| Any decals ripped? | Rear decal faded |
Dimensions
| Length | Width | Height | |
| Shipping dimensions (blade not turned) | 4900mm | 3350mm | 3050mm |
| Trucking dimensions (blade turned) | 5500mm | 3090mm | 3050mm |
| Width from outside to outside of tracks | 2770mm |
