| Make: | Champion |
| Model: | 720A VHP |
| Stock No: | 10014 |
| Year: | 1999 |
| Hours: | 4597 |
| Overall condition: | 4.25 Moldboard Ripper, 17.5 x 25 Tyres Please call for details. |
| Are there any Cracks or Wields: | |
| Overall rating | ![]() |
| Other comments | Other than normal wear the machine is in above average condition. Front glasses are cracked |
| Engine model | Cummins C83 |
| Engine serial no. | 45691243 |
| Engine blow by: | None |
| General running condition | Good, above average |
| Transmission | Pulls in all gears. |
| Torque converter | Functions properly, leak around main hose |
| Front axle | Good |
| Differential Rear | Good |
| Final drives | Good |
| General condition any other comments | Functions properly. |
| Pumps | Functions properly |
| Hydraulic motors | Functions properly |
| Valves | Working |
| Hydraulic tank | Full |
| Hoses | Good |
| Cylinders | Good, minor seepage |
| Auxillary Hydraulics | Good |
| General running condition of hydraulics | Hydraulics function properly |
| Lights | All work except signal |
| Wipers | Both work |
| AC | Works |
| Seat condition | Good |
| Cladding condition | Good |
| Floor mat condition | Good |
| Blade width | 4.25m |
| Blade height | 0.60m |
| Cutting edges condition | New edges on bottom, side need to be replaced |
| Linkage on back of blade | Little wear, pretty tight |
| Turntable & drive sprocket | Shims, all the way around |
| General blade condition | Good |
| Ripper make | Esco |
| Number of tines | 5 |
| Wear in tines | Minor |
| Wear in mounting pins | Minor |
| General condition | Ripper has been used very little |
| Any damage to panels | No |
| Paint condition | Average, original paint |
| Any decals ripped | No |
| Size | 17.5 - 25 - L3 Nylon |
| L/H Front | 60%, no damage |
| R/H Front | 60%, no damage |
| L/H Rear Front | 40%, no damage |
| L/H Rear Back | 40%, no damage |
| R/H Rear back | 40%, no damage. |