Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Champion 720A III, (70111)
Call
| Make: | Champion |
| Model: | 720A III |
| Stock No: | 70111 |
| Year: | 1993 |
| Hours: | 5111 |
Inspection report compiled by an independent service and repair company based in Southampton.
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Overall machine is in very good condition for age, has been well looked after. |
| Are there any Cracks or Wields: | All good |
Engine
| Engine model and serial number | Cummins 412 |
| Blow by | Minimal  |
| Oil or fuel leaks | Minor leaks around sump  |
| General running condition | Runs very well |
Click on a thumbnail to enlarge
Drive Train
| Transmission | Good |
| Torque convertor | Good |
| Hydraulic tank | Good |
| Hoses | Some perished |
| Cylinders | All good, no leaks. |
| Auxiliary hydraulics | Fitted |
| General running condition of hyds | Very good, smooth operation. |
Cab
| Back up alarm | Fitted |
| Battery isolator switch | Fitted |
| Lights | All good |
| Wipers | All good. |
| Heater | Good |
| Seat condition | Good |
| Cladding condition | Good |
| Floor mat condition | Good |
| Beacon | good |
| Seat belt | Good |
| Mirrors | Good |
| Cab glass | All good |
| Steps and grab handles | All good |
Click on a thumbnail to enlarge
Blade
| Blade dimensions | 4000 mm x 660mm |
| Cutting edges condition | Very good. |
| Linkage on back of blade | Good |
| Turntable and drive sprocket, are there shims | Good, minimal play |
| General blade condition | Very good |
Click on a thumbnail to enlarge
Panels & Paint/Decals
| Any damage to panels | Trans plate bent |
| Paint condition | Average - good |
| Any decals ripped | Usual scuffs |
Tyres
| Tyre size 14.00 - 24 | |
| L/H Front | 80% good, no cuts or damage |
| R/H Front | 80% good, no cuts or damage |
| L/H Rear front | 10% - perished |
| R/H Rear front | 10% - perished |
| L/H Rear back | 30% - perished |
| R/H Rear back | 30% - perished |
