Komatsu D61PX-23 for sale by Red Bull Equipment.

Komatsu D61PX-23 with ripper

Komatsu D61PX-23
Click on a thumbnail to enlarge
Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23
Machine Key Details
Make: Komatsu
Model: D61PX-23
Stock No: 70390
Year: 2014
Hours: 4700
Location: Southampton
MS Ripper, Topcon Plug & Play. Ripper valve.

Inspection Report

Inspected by an independent plant service and repair company.

Engine

 
Engine model and SN SAA6D107E-2 SN 26603245
Blow by Minimal
4
Oil or fuel leaks None visible.
4
General engine running condition Good overall
4
Komatsu D61PX-23
Click on a thumbnail to enlarge
Komatsu D61PX-23 Komatsu D61PX-23

Transmission

 
Gear change Smooth
4
Steering Responsive
4
Oil leaks None visible.
4
Overall condition of transmission Good overall.

U/C

 
Shoe width 860mm
Shoe height 52mm - 85% good.
4
Rail height 113mm - 80% good.
4
Idler height 17mm - 80% good.
4
Top rollers 167mm to 170mm - 80% good.
4
Bottom rollers 194mm - 80% good.
4
Sprockets 87mm - 60% good.
3
Komatsu D61PX-23
Click on a thumbnail to enlarge
Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23

Cab

 
Back up alarm Loud and clear
4
Battery isolator switch Manual and electronic, present and working.
4
Lights All working.
4
Wipers All working, washers need attention.,
3
Heater Produces and good amount of heat.
4
AC Needs attention.
2
Seat condition Dirty, no stains or wear.
3.5
Cladding condition Dirty, no wear or damage.
3.5
Floor mat condition Dirty, no tears or major wear.
3.5
Seat belt Clean and working.
4
Mirrors Single rear view fitted.
4
Horn Loud and clear.
4
Cab glass. Good, some light scratches.
4
Steps and grab handles All straight.
4
Komatsu D61PX-23
Click on a thumbnail to enlarge
Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23 Komatsu D61PX-23

Blade

 
Blade type PAT - 6 way
Blade dimensions 3840mm x 1320mm
Cutting edges condition 50mm remaining. Have been turned.
2.5
Blade to arm pins. No wear.
4
Ball pivot No wear.
Swivel rams No wear.
Main lift rams. Minor wear left side on blade end, right side good.
C frame pins and bushings Good.
Blade tilt rams Minor wear 2/3 mm
D61
Click on a thumbnail to enlarge

Attachment

 
Ripper manufacturer Komatsu 4CD01-u
Number of tines 3
Wear in tine pins Minimal wear
4
Wear in mounting pins Minimal wear
4
General condition Very good, new teeth fitted.
5
Komatsu D61PX-23
Click on a thumbnail to enlarge
Komatsu D61PX-23

Panels & Paint/Decals

 
Any damage to panels No damage
Paint condition Overall good, some scratches.
3.5
Any decals ripped. Some ripped.
2.5

Enquire Online

Your Name * Enquire about *
Telephone *
Message
Email Address *
Your Country
* = required field