Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Komatsu D61PX-15 (70105)
Call
| Make: | Komatsu |
| Model: | D61PX-15 |
| Stock No: | 70105 |
| Year: | 2007 |
| Hours: | 6502 |
Inspection report compiled by an independent service and repair company based in Southampton.
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Machine in good condition - four star rating |
| Overall rating |  |
| Other comments | Wired for a laser. Due service. Blade angle ram leaking. |
Engine
| General running condition of engine | Very good. |
| Oil or fuel leaks | None seen |
| Any blow by? | Minimal |
| Engine model and serial no. | Komatsu SA6D114E-2 SN 30567555 |
Click on a thumbnail to enlarge
Transmission
| Steering | Good |
| Gear change | Good |
| Oil leaks | None seen. |
| General running condition of transmission | Very good. |
U/C
| Shoe width | 860mm |
| Shoe height | 40mm - 20% good. - trailing edge of pad has wear.  |
| Rail height | 115mm - 80% good |
| Pins and bushings | Not turned - 70% good. |
| Idler height | 80% good. |
| Top rollers | 155mm - 65% good. |
| Bottom rollers | 80% good. |
| Sprockets | 85mm - 50% good |
Click on a thumbnail to enlarge
Cab
| Lights | All good. |
| Wipers | All good |
| Heater | Good. |
| AC | Good |
| Cladding condition | Dirty, holes have been drilled.  |
| Floor mat condition | Good |
| Seat belt | Good. |
| Cab glass | All good |
| Steps and grab handles secure | All good. |
Click on a thumbnail to enlarge
Blade
| Blade type | PAT |
| Blade dimensions | 3860mm x 1320mm |
| Cutting edges | Fair, been turned.  |
| Blade to arm pins, wear and shims | Slight play |
| Truinions wear and shims | Slight play |
| General blade condition | Very good. |
Click on a thumbnail to enlarge
Panels & Paint/Decals
| Any damage to panels | NS engine door to be looked at. |
| Paint condition | Good. |
| Any decals ripped | Faded and scratched. |
Dimensions
| Length | Width | Height | |
| Shipping dimensions (blade straight) | 5750mm | 3860mm | 3100mm |
| Haulage dimensions (blade turned) | 6500mm | 3600mm | 3100mm |
| Width outside to outside of tracks (blade removed) | 3000mm |
