| Make: | Caterpillar |
| Model: | D6N LGP |
| Stock No: | 70142 |
| Year: | 2005 |
| Hours: | 6710 |
| Overall condition: | Machine tidy, blade has been overhauled. New idlers, sprockets, top rollers. Double bottom rollers replaced. Track chains worn through to bushes. Sate of oil and filters sugguest machine has just been serviced. |
| Overall rating | ![]() |
| Oil leaks | Good ![]() |
| Steering | Good ![]() |
| Gear change | Good ![]() |
| General engine running condition | Starts and runs well, just been serviced. ![]() |
| Oil or fuel leaks | None ![]() |
| Any blow by | None ![]() |
| General running condition | Good ![]() |
| Gear change | Good ![]() |
| Steering | Good ![]() |
| Oil leaks | Good ![]() |
| General running condition | Good ![]() |
| Shoe width | 860mm |
| Shoe height | 50mm - 75% good. ![]() |
| Rails | 110mm - 65% good. ![]() |
| Pins and bushings | 25% - worn through to pins. ![]() |
| Idler height | 20mm - 90% good ![]() |
| Top rollers | 80% ![]() |
| Bottom rollers - double rollers | 70% good ![]() |
| Bottom rollers - single rollers | 55% good ![]() |
| Sprockets | 80% good ![]() |
| Battery isolator switch | Fitted ![]() |
| Lights | Working ![]() |
| Wipers | Working ![]() |
| Heater | Working ![]() |
| Seat condition | Good, runners loose - to be fixed. |
| Floor mat condition | Good ![]() |
| Seat belt | Good ![]() |
| Mirrors | Good ![]() |
| Horn | Good ![]() |
| Cab glass | Good ![]() |
| steps and grab handles | Good ![]() |
| Blade type | 6 way - PAT |
| Blade dimensions | 1300 mm x 3950 mm (without corner shoes fitted) |
| Cutting edges condition | New fitted ![]() |
| Blade to arm pins, wear and shims | Slight movement ![]() |
| Trunions wear and shims | Good ![]() |
| Blade condition | Blade has been re-skimmed. Condition very good. ![]() |
| Any damage to panels? | No ![]() |
| Paint condition | Fair to good. ![]() |
| Decals | D6N side door decal ripped. ![]() |
| Length | Width | Height | |
| Dimensions for shipping (blade straight) | 5200mm | 3950mm | 3020mm |
| Width of machine with blade removed (outside to outside of tracks) | 3030mm |