Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Caterpillar D5N LGP (70130)
Call
| Make: | Caterpillar |
| Model: | D5N LGP |
| Stock No: | 70130 |
| Year: | 2005 |
| Hours: | 3057 |
Inspection report compiled by an indpendent service company based in Southampton
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Overall machine in very good condition |
| Overall rating |  |
Engine
| General running condition | Very good. |
| Oil or fuel leaks | None seen |
| Blow by | Minimal |
| Engine model and serial number | Cat 3126 SN BMA21330 |
Click on a thumbnail to enlarge
Transmission
| Steering | Good |
| Gear change | Good |
| Oil leaks | None seen. |
| General enging running condition | Very good |
U/C
| Shoe width | 760mm - NEW 100% good |
| Rail height | 60mm - 75% good |
| Pins and bushings | NOT TURNED - 60% good  |
| Idler height | 14mm - 75% good |
| Top rollers | 150 mm - 60% good |
| Bottom rollers | 70% good - |
| Sprockets | 80mm - 50%  |
Click on a thumbnail to enlarge
Cab
| Lights | Good, all work |
| Wipers | Rear wiper missing to be replaced.  |
| Heater | Good |
| Seat condition | Good |
| Cladding condition | Needs glueing - to be fixed. |
| Floor mat condition | Good |
| Seat belt | Good |
| Cab glass | All good |
| Steps and grab handles | All good, rear handle bent,to be straigthened |
Blade
| Blade type | PAT |
| Blade dimensions | 3320mm x 1000mm |
| Cutting edges | Worn out - need replacing |
| Blade to arm pins, wear and shims | Minimal |
| Trunions wear and shims | Minimal |
| General blade condition | Good |
Panels & Paint/Decals
| Any damage to panels | Hydraulic tank dented |
| Paint condition | Good |
| Any decals ripped | Rear OS decal scratched off |
Dimensions
| Length | Width | Height | |
| Dimensions for shipping (blade straight) | 4600mm | 3320mm | 3100mm |
| Dimensions for haulage (blade turned) | 5250mm | 3070mm | 3100mm |
| Width outside to outside | 2770mm |
