Adam & Louis Gibbings: +44 (0)1769 581 222 | Paul Dinnis: +44 (0)1579 344 307
Caterpillar D5N LGP (70121)
Call
| Make: | Caterpillar |
| Model: | D5N LGP |
| Stock No: | 70121 |
| Year: | 2005 |
| Hours: | 4555 |
Inspection report compiled by an independent service and repair company based in Southampton.
Click on a thumbnail to enlarge
General Condition
| Overall condition: | Machine very tidy, drives well. Paint work good, cab very clean. |
| Overall rating |  |
Engine
| Any blow by? | None |
| Oil or fuel leaks | None |
| General running condition | Starts and runs well, no smoke. |
Click on a thumbnail to enlarge
Transmission
| Gear change | Good |
| Steering | Good |
| General running condition | Very good |
U/C
| Shoe width | 760m |
| Shoe height | 50mm - 80% good |
| Rail height | 100mm - 80% good. |
| Pins and bushings | System 1 - 80% good |
| Top rollers | 155mm - 75% good  |
| Bottom rollers | 160mm - 60% good  |
| Sprockets | 80% good. |
Click on a thumbnail to enlarge
Cab
| Lights | Front ok - no rear lights fitted. |
| Wipers | All good, working |
| Heater | Working |
| AC | Working |
| Seat condition | Good |
| Cladding condition | Good |
| Floor mat condition | Good |
| Seat belt | Good |
| Cab glass | Good |
| Steps and grab handles secure? | Good |
Click on a thumbnail to enlarge
Blade
| Blade type | PAT - 6 way |
| Blade dimensions | 3330mm x 1120mm |
| Cutting edges condition | Centre edges have been turned. |
| Blade to arm pins, wear and shims | Slight lift in centre pin. |
| Trunions wear and shims | Slight wear |
| General blade condition | Very good, no dents. Corner shoes good. |
Click on a thumbnail to enlarge
Panels & Paint/Decals
| Any damage to panels | None |
| Paint condition | Very good  |
| Any decals ripped? | None |
Dimensions
| Length | Width | Height | |
| Shipping dimensions (blade straight) | 4860mm | 3330mm | 3000mm |
| Trucking dimensions (blade turned) | 5400mm | 3200mm | 3000mm |
| Width from outside to outside of tracks | 2770mm |
