Caterpillar D5M XL (70141)

Call

Make: Caterpillar
Model: D5M XL
Stock No: 70141
Year: 1998
Hours: 2995
Bulldozer inspected by an independent plant service company based in Southampton.
Caterpillar D5M XL
Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL
Click on a thumbnail to enlarge

General Condition

Overall condition: Paint work good, machine good for year.

Engine

Any blow by Slight  3.5
Oil or fuel leaks None  4
General running condition Starts well from cold, runs well.  3.5

Transmission

Gear change Good  4
Steering Good  4
Oil leaks None  4
General running condition Good.  3.5

U/C

Shoe width 560mm  
Shoe height 50mm - 80% good  4
Rail height 90mm - 60%  2.5
Pins and bushings 50mm - 50% - NOT TURNED  2.5
Top rollers 150mm -30%  2.5
Bottom rollers 160mm - 30%  2.5
Sprockets 20%  2.5
Front Idlers 20% and 60%  2
Rear Idlers 70%  3.5
Caterpillar D5M XL
Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL
Click on a thumbnail to enlarge

Cab

Back up alarm Fitted and working  4
Battery isolator switch Fitted  4
Lights To be replaced / repaired  
Wipers To be replaced.  
Heater Working  
A/C Working  3.5
Seat condition Good  4
Cladding condition Good  4
Floor mat condition Good  4
Seat belt Good  4
Mirrors Good  4
Cab glass Good  4
Caterpillar D5M XL
Click on a thumbnail to enlarge

Blade

Blade type PAT  
Blade dimensions 3130mm x 1010mm  
Cutting edges condition Good - NOT TURNED  4
Blade to arm pins, wear and shims Tilt ram O/S cylinder end bushes and pins worn  2
Trnions wear and shims A frame pins and bushings have wear.  2
General blade condition Blade face good, no marks or dents  4
Caterpillar D5M XL
Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL Caterpillar D5M XL
Click on a thumbnail to enlarge

Panels & Paint/Decals

Any damage to panels None, L/HS door not closing, to be looked at.  3
Paint condition Good  4
Any decals ripped None  4

Dimensions

  Length Width Height
Dimensions for shipping (blade straight) 4500mm 3130mm 3070mm
Dimensions for haulage (blade turned) 5200mm 2750mm 3070mm
Measurement from outside to outside of tracks 2330mm

Enquire Online

Your Name
 *
Telephone
 *
Email Address
 *
Your Country
Enquire about
 *
Message
please check all details are correct before submitting